PE Pressure Pipe White Co-Ex

Typically identified by the external White Co-ex jacket, multi-application PE pipe for above ground applications comes in sizes ranging from 16-1200mm. White Co-ex PE pipe with blue, purple, yellow, cream stripes required in specific applications are also available. Vinidex PE pipes are manufactured to AS/NZS 4130. A commitment to using only the highest standard of raw materials and the latest manufacturing technology has established Vinidex with a reputation as a quality supplier of polyethylene pipes.


Applications

  • Potable water

  • Recycled water

  • Waste water

  • Gas

PE Pressure Pipe White Co-Ex Products

PE Pressure pipe – ASNZS 4130 PE 100 White Co-Ex

Features & Benefits

  • High-impact strength

    The high impact strength of PE pipes ensures resistance to the rigors of pipe laying conditions.

  • Damage resistant

    PE has low notch sensitivity, providing a high level of resistance to the effects of external damage, especially important for pipe bursting operations and where there is a likelihood of such damage.

  • Corrosion resistant

    PE pipes are highly resistant to corrosion and do not require any protective coatings or other corrosion protection systems.

  • Weathering resistant

    PE pipes are stabilised against ultraviolet (UV) light degradation by the inclusion of carbon White Co-ex in the raw material. White Co-ex PE pipes are, therefore, suitable for installations where the pipes are exposed to direct sunlight.

  • Co-extrusions

    PE pipe is available in a range of identification colours that may be either co-extruded as stripes or “jackets” that completely surround the pipe. Blue is used for identification of water pipes, purple for recycled water pipes and yellow for gas. White jacket are used for minimisation of heat build-up in above ground pipes exposed to sunlight. White co-ex pipes are extensively used in the mining industry.

Product Properties
Certifications & Approvals
Installation
Downloads
Size Range
16-1200mm
Material Properties
PE100
PE Material Properties
Pressure Rating
For Pressure Ratings please see Product Range listed above.
Temperature
The physical properties of Vinidex PE pipes are related to a standard reference temperature of 20°C. For further information please view PE Temperature Influences.
Chemical
Chemical Resistance

Green Star & Sustainability

Green Star Sustainability Credits may be earnt by using Vinidex Polyethylene (PE). For details contact your Vinidex representative.

Standards for Polyethylene Pipe
AS/NZS 4130 Polyethylene (PE) pipes for pressure applications.

Environmental Product Declaration

VIN104 Polyethylene Pipes

Safety Data Sheets (SDS)

Click here to access our Safety Data Sheets page.

Standards

For installation of PE pressure pipes, refer to AS/NZS 2033 – Installation of Polyethylene Pipe Systems, AS/NZS 3500 – Plumbing and Drainage, AS/NZS 2566.1 – Buried Flexible Pipes Part 1, Structural Design and AS/NZS 2566.2 – Buried Flexible Pipes Part 2 – Installation.

Vinidex Recommends

A range of different installation and jointing methods are dependent on the type of fitting used. For more information on PE jointing, please view PE Systems Support.

Product Catalogue

Download PDF

PDF download

Product Properties
Size Range
16-1200mm
Material Properties
PE100
PE Material Properties
Pressure Rating
For Pressure Ratings please see Product Range listed above.
Temperature
The physical properties of Vinidex PE pipes are related to a standard reference temperature of 20°C. For further information please view PE Temperature Influences.
Chemical
Chemical Resistance
Certifications & Approvals

Green Star & Sustainability

Green Star Sustainability Credits may be earnt by using Vinidex Polyethylene (PE). For details contact your Vinidex representative.

Standards for Polyethylene Pipe
AS/NZS 4130 Polyethylene (PE) pipes for pressure applications.

Environmental Product Declaration

VIN104 Polyethylene Pipes

Safety Data Sheets (SDS)

Click here to access our Safety Data Sheets page.

Installation

Standards

For installation of PE pressure pipes, refer to AS/NZS 2033 – Installation of Polyethylene Pipe Systems, AS/NZS 3500 – Plumbing and Drainage, AS/NZS 2566.1 – Buried Flexible Pipes Part 1, Structural Design and AS/NZS 2566.2 – Buried Flexible Pipes Part 2 – Installation.

Vinidex Recommends

A range of different installation and jointing methods are dependent on the type of fitting used. For more information on PE jointing, please view PE Systems Support.

Downloads

Product Catalogue

Download PDF

PDF download