Pecatadaptors DN80 – DN200

 

Contact Vinidex Customer Service for availability of products on this page.

Viking Johnson UltraGrip Pecatadaptors are factory assembled with a PE tail, ready for jointing into a pipe network by butt fusion or using an electrofusion coupler. The PE connection is 500mm in length which will accommodate two electrofusion connections. Stainless Steel internal support liner is required when mechanical joints are used on PE pipes and thin walled PVC in order to prevent excessive pipe deformation which can occur.

Working Pressure DN40-DN300 16bar (Water)
Gasket NBR (EPDM Available on request)
Fasteners A4 316 SS or A2 304 SS
Torque Rate M12 = 55-70Nm, M16 = 95-120Nm
Vinidex Code - NBR A2 Fasteners Vinidex Code - NBR A4 Fasteners Nominal Size DN (mm) Size Range Min (mm) Size Range Max (mm) PE Pipe Size PE Pipe SDR Insertion Depth D Min Insertion Depth D Max Diameter A (mm) Overall Length B (mm) PE Pipe End L (mm x mm) Bolts (Number - Diameter x Length) Approx. Weight (kg)
59576 59450 80 85.7 107 90 11 65 95 212 682 496 3-M12 x 70 6.8
59577 59451 100 107 133.2 110 11 90 115 280 708 496 3-M16 x 93 11.8
59452 100 107 133.2 125 11 90 115 280 701 496 3-M16 x 93 12.5
59453 125 132.2 160.2 110 11 90 115 305 727 496 3-M16 x 93 13.4
59454 125 132.2 160.2 125 11 90 115 305 721 496 3-M16 x 93 14.1
59578 59455 150 158.2 192.2 160 11 90 125 339 730 496 4-M16 x 93 20
59456 150 158.2 192.2 180 11 90 125 339 727 496 4-M16 x 93 22.5
59579 59457 200 218.1 256 225 11 125 165 432 751 496 5-M16 x 93 34.8

Other Pecatadaptors DN80 – DN200 Products

Couplings DN40 – DN600