Vinidex manufacturers and supplies a broad range of products & systems to suit a range of applications.
Vinidex’s products and systems are versatile and can be used in a variety of markets and applications.
Watering livestock
Aquakool™ is ideally suited for exposed above-ground applications where traditional black PE100 pressure pipe is likely to retain heat and increase the temperature of the fluid inside the pipe.
Note: Variations in solar radiation intensity with time of day, cloud cover, altitude, season and pipeline orientation will affect pipe temperature. Wind velocity, ambient temperature and the flow rate, temperature and nature of the conveyed fluid will also influence the pipe wall temperature.
Size Range
1 to 2 inches
Pressure Rating
For Pressure Ratings please see Product Ranges listed above.
Temperature Influences
The physical properties of Vinidex PE pipes are related to a standard reference temperature of 20°C. For further information please view PE Temperature Influences.
Chemical Resistance
Safety Data Sheets (SDS)
Click here to access our Safety Data Sheets page.
Contact with drinking water
Vinidex PE pipes comply with the requirements of AS/NZS 4020 – Testing of products for use in contact with drinking water. This Standard specifies a series of type tests, which are carried out in order to demonstrate that the product does not have a detrimental effect on the quality of drinking water. It assesses the effect of the pipe on the taste, odour and appearance of water as well as the health aspects due to growth of microorganisms and leaching of toxic substances.
StandardsMark
WaterMark
Vinidex Recommends
A range of different installation and jointing methods are dependent on the type of fitting used, please refer to PE Systems under Product Support.
Product Catalogue
Size Range
1 to 2 inches
Pressure Rating
For Pressure Ratings please see Product Ranges listed above.
Temperature Influences
The physical properties of Vinidex PE pipes are related to a standard reference temperature of 20°C. For further information please view PE Temperature Influences.
Chemical Resistance
Safety Data Sheets (SDS)
Click here to access our Safety Data Sheets page.
Contact with drinking water
Vinidex PE pipes comply with the requirements of AS/NZS 4020 – Testing of products for use in contact with drinking water. This Standard specifies a series of type tests, which are carried out in order to demonstrate that the product does not have a detrimental effect on the quality of drinking water. It assesses the effect of the pipe on the taste, odour and appearance of water as well as the health aspects due to growth of microorganisms and leaching of toxic substances.
StandardsMark
WaterMark
Vinidex Recommends
A range of different installation and jointing methods are dependent on the type of fitting used, please refer to PE Systems under Product Support.
Product Catalogue
